Case Heltec V3 cho Meshtastic

These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.
 

Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) if you see the case for sale anywhere please reach out. 

Slim case for Heltec v3 board designed with the Meshtastic project (https://meshtastic.org) in mind that accepts 3000mah battery by maker focus. 
Has a cutout for the SMA antenna connector so the sma connector doesn't move when you screw or unscrew the antenna.

Keep in mind the back side of the heltec board should go in first and the usb-c side. You will need to push the usb-c side of the case for the board to fit. If you want to remove the board from the case you will need to push the usb c side of the case and then apply gentle pressure to the screen.

Updated the back panel for better compatibility for the magsafe rings available on amazon
Update 10/24/24 - Moved the top 2 screw holes to the corner.

Required hardware:
1 LiPo battery Amazon Link
1 Heltec v3 Amazon Link
Optional Magsafe ring Amazon Link

Meshtastic® is a registered trademark of Meshtastic LLC.
Amazon links are for reference. I do not earn anything from the above links.