Giá đỡ cuộn filament kiểu Pháp đơn giản

Simple French Cleat Filament Spool Holder
Introducing a practical solution for your filament storage needs – Simple French Cleat Filament Spool Holder! 
This 3D printing creation offers efficient organization and easy access for your filament spools. Its wall-mountable design maximizes space and ensures tangle-free storage, simplifying your 3D printing workspace. Elevate your 3D printing setup with this functional storage solution, designed to streamline your filament management and enhance your creative process. Upgrade your space with this French Cleat Filament Spool Holder today!

You can choose to print all parts in One Print!!!! Yay!!!

Legs:

• Left Leg - x 1
• Right Leg - x 1
• Leg Spacer - x 1

Bearing Shaft:

• Shaft Body - x 1
• Bearing Holder - x 2
• Washer - x 4
• M3 Hex Nut Holder - x 2

Spool Holders:

• spool-holder_universal_60 or spool-holder_universal_90 or mix - x 2 (depending on your spool size)
• spool-holder_stopper - x 1

Hardware:

• 608 Bearings - x 2 or Optionally use the End Cap for Spool Holder Shaft - https://www.printables.com/model/420595-end-cap-for-spool-holder-shaft
• M3 Hex nut - x 2
• M3x12mm Bolt - x 4
• M3x20mm Bolt - x 2

Print Settings:

• Layer Height - 0.2 mm
• Infill - 20% - 30%
• Brims - You can try add brims to smaller parts
• Rafts - NO
• Supports - NO
• Material - I printed in PLA (Preferable to use PETG for extra strength)
• Printing time - <4hrs on my Bambulab P1S

Notes:

• I used a 63mm ¾" Plywood as the wall plate. Primed and painted in white.
• Used some filament to add tension through the holes. If you need to further restrict the smooth spool rotation, you can replace 608 bearing(s) with the Optional shaft holder listed in the reference below.

References:

• Spool Holder Shaft for Daiso Dry Box - https://www.printables.com/model/417311-spool-holder-shaft-for-daiso-dry-box
• Spool Holder - https://www.printables.com/model/360229-daiso-55l-filament-dry-box-with-manual-rewind
• M3 Hex nut holder - https://www.thingiverse.com/thing:3050607
• (Optional if you don't want to use bearings) End Cap for Spool Holder Shaft - https://www.printables.com/model/420595-end-cap-for-spool-holder-shaft