
Insert lưu trữ Gridfinity hốc bên cho Prusa Core One (Base 5×1.5, gắn nam châm)
- Downloads
- 8
- Likes
- 6
- Views
- 167
- Remixes
- 1
- Comments
- 0
Files 3 1.9 MB
- Gridfinity_insert_1772326265.stlSTL · 409.1 KB
- Holes_test_1772326266.stlSTL · 20.2 KB
- gridfinity_inseret_1772326267.f3dF3D · 1.5 MB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #231769
- Category
- Máy In 3D
- Published
Description
This is a side niche Gridfinity storage insert designed specifically for the Prusa Core One.
I wanted to make the best possible use of the available space inside the printer’s side compartment, so this base is sized 5 × 1.5 Gridfinity units, providing a compact but highly usable storage area for small tools, parts, or accessories.
Modules
The photos show this insert populated with several holders:
Magnet-ready (press-fit, no glue needed)
All magnet holes are designed for 6 × 2.55 mm magnets.
-
Hole diameter: 6.1 mm
-
Hole depth: 2.6 mm
This creates a tight press-fit so the magnets can be inserted with force and should stay in place without glue.
I strongly recommend printing Holes_test.stl first to verify that your magnets fit properly, as magnet tolerances can vary between manufacturers.
For easier customization, I am also including the Fusion 360 source file, so you can quickly adjust the magnet hole dimensions to your needs.
Printing recommendations
In my experience, this part prints and looks best when oriented upright, using supports only from the bottom (as shown in the screenshot).
It may also be possible to print without supports, but I have not tested that configuration.
Build plate placement note
PrusaSlicer did not automatically place the model on the build plate due to its shape and size.
You will need to rotate it manually, but it does fit on the build plate, even with supports enabled.
Check out my Gridfinity collection for more custom holders and organizers I made.
Print spec
- Formats
- f3dstl
- Model files
- 3
- Total size
- 1.9 MB
- Largest file
- 1.5 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-

-

-

-

-
New


