
OpenPrintTag SpoolAdapter Slim – Adapter snap-in mỏng cho cuộn filament
Remix of Adapter Gắn Cuộn Dây OpenPrintTag By philiip11
- Downloads
- 14
- Likes
- 14
- Views
- 239
- Remixes
- 1
- Comments
- 0
Files 13 7.4 MB
- OpenPrintTag_Spool_Adapter_Slim_Addnorth_1771889141.stlSTL · 499.9 KB
- OpenPrintTag_Spool_Adapter_Slim_Amazon_Basic_3DJake_1771889142.stlSTL · 689.7 KB
- OpenPrintTag_Spool_Adapter_Slim_Bambu_Lab_1771889143.stlSTL · 566.8 KB
- OpenPrintTag_Spool_Adapter_Slim_Elegoo_1771889143.stlSTL · 526.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #224757
- Category
- Máy In 3D
- Published
Description
Description
This is a set of snap-in spool adapters designed for the OpenPrintTag.
These adapters are the slim version of the original model.
Also, you can use this adapter to reuse the OpenPrintTag without having to worry about the adhesive not sticking anymore.
Why use this?
Fits many spools that are normally incompatible with OpenPrintTag
Snap-fit engagement - clicks into place and holds firmly
Reusable - just pull it out and transfer it to the next spool
Compatibility - works with the Core One+ Spoolholder
(slim version in blue, original in orange)
Spools
Some brands change spooltype or use the same spooltype as other brands. Use this table to find the right file for your spool.
Tip: For paper spools, twist the SpoolAdapter while inserting.
Brand/Type
Spool
Slim version
3DJake
AmazonBasic
add:north 1kg
(no image available)
✅
add:north 750g
untested
✅
Bambu Lab
untested
✅
Elegoo
(no image available)
✅
Eryone
✅
Geetech
Coming soon.
Use this instead.
Overture
✅
Panchroma by Polymaker
✅
Polymaker
✅
Prusament (cardboard-core)
1kg & 2kg
✅
Recycling Fabrik MultiSpool
✅
Sunlu (old)
Coming soon.
Use this instead.
Sunlu (1st Gen)
Jayo
Coming soon.
Use this instead.
Sunlu (2nd Gen)
✅
Sunlu (3rd Gen)
✅
Tinmorry A
Coming soon.
Use this instead.
Tinmorry B
Coming soon.
Use this instead.
Tinmorry C
✅
Printing recommendations
Property
Value
Material
PLA
Nozzle
0.4 mm
Layer height
0.2 mm
Perimeters
2 recommended
Infill
10 % gyroid
Supports
Not required
Brim
Not required
No post-processing is required. Simply click the adapter into the spool and stick the OpenPrintTag into place.
Feedback
If you want adapters for more spool brands, leave a comment with the exact inner diameter, thickness, brand and a photo. I'm happy to add more!
Print spec
- Formats
- stl
- Model files
- 13
- Total size
- 7.4 MB
- Largest file
- 723.5 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-



