
Adapter Gắn Cuộn Dây OpenPrintTag
- Downloads
- 904
- Likes
- 280
- Views
- 5,035
- Remixes
- 1
- Comments
- 0
Files 16 3.1 MB
- SpoolAdapter_Madmission_1766199305.stlSTL · 209 KB
- OpenPrintTaq_SpoolAdapter_AmazonBasic_3DJake_1766199306.stlSTL · 215.2 KB
- OpenPrintTaq_SpoolAdapter_Elegoo_1766199307.stlSTL · 200 KB
- OpenPrintTaq_SpoolAdapter_Eryone_1766199307.stlSTL · 202.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #169850
- Category
- Máy In 3D
- Published
Description
Description
This is a set of snap-in spool adapters designed for the OpenPrintTag.
Some filament brands have oversized inner spool diameters, which makes the OpenPrintTag unable to stick in place. These adapters solve that issue by reducing the inner diameter and providing a secure mounting point.
Also, you can use this adapter to reuse the OpenPrintTag without having to worry about the adhesive not sticking anymore.
Why use this?
Fits brand spools that are normally incompatible with OpenPrintTag
Snap-fit engagement - clicks into place and holds firmly
Reusable - just pull it out and transfer it to the next spool
Spools
Some brands change spooltype or use the same spooltype as other brands. Use this table to find the right file for your spool.
Tip: For paper spools, twist the SpoolAdapter while inserting.
Brand/Type
Spool
3DJake
AmazonBasic
(no image available)
Elegoo
(no image available)
Eryone
Geetech
Overture
Panchroma by Polymaker
Polymaker
Prusament (cardboard-core)
Recycling Fabrik MultiSpool
Sunlu (old)
Sunlu (1st Gen)
Jayo
Sunlu (2nd Gen)
Sunlu (3rd Gen)
Tinmorry A
Tinmorry B
Tinmorry C
Printing recommendations
Property
Value
Material
PLA
Nozzle
0.4 mm
Layer height
0.2 mm
Perimeters
2 recommended
Infill
10 % gyroid
Supports
Not required
Brim
Not required
No post-processing is required. Simply click the adapter into the spool and stick the OpenPrintTag into place.
Note: the measurements in the file description are rounded, tolerances of +/-1mm are expected.
Feedback
If you want adapters for more spool brands, leave a comment with the exact inner diameter, thickness, brand and a photo. I'm happy to add more!
Print spec
- Formats
- stl
- Model files
- 16
- Total size
- 3.1 MB
- Largest file
- 215.2 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-



