
Kệ đôi cho Roland AIRA Compact (S-1, T-8, J-6, E-4)
- Downloads
- 12
- Likes
- 1
- Views
- 110
- Remixes
- 0
- Comments
- 0
Files 4 19.6 MB
- Aira_Compact_Stand_2v_25_45_Hex-Pattern_Left_1771111737.stlSTL · 5.4 MB
- Aira_Compact_Stand_2v_25_45_Hex-Pattern_Right_1771111739.stlSTL · 5.4 MB
- Aira_Compact_Stand_2v_25_45_No-Pattern_Left_1771111740.stlSTL · 4.4 MB
- Aira_Compact_Stand_2v_25_45_No-Pattern_Right_1771111741.stlSTL · 4.4 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #220314
- Category
- DIY
- Published
Description
Double Stand for Roland AIRA Compact Units (S-1, T-8, etc.)
Platform angles: 25° and 45°
Two versions are provided:
• with hexagonal groove pattern
• plain
Assembly requires three rods to hold the sides together. I used solid aluminium rods. The rods can be glued in place or secured with grub screws and threaded inserts. If using glue, ensure the distance between the sides is correct before the adhesive cures.
Hardware:
-
3x Ø6mm rods, length 196 mm
-
optional for screw mounting:
• 6× M4 threaded inserts (M4×8.1mm)
• 6× M4 grub screws (M4×8mm) -
4x Ø10mm rubber feet, recommended thickness 1.5-3mm.
The six holes on each inner surface are designed for M4×4 threaded inserts, in case something needs to be mounted underneath the units.
I printed this in Matte PLA with 0.4mm nozzle, 0.2mm layer height, 3 perimeters and 5 solid top/bottom layers, 20% cubic infill. No supports. It should also print fine with 0.6mm nozzle and 0.3mm layer height.
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 19.6 MB
- Largest file
- 5.4 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-
New -
New -

-

-
New -


