
Bộ linh kiện thay thế Centauri Carbon tối ưu cho FDM
- Downloads
- 17
- Likes
- 7
- Views
- 192
- Remixes
- 1
- Comments
- 0
Files 13 16.1 MB
- filamentcutter_opt_1770864755.stepSTEP · 51.9 KB
- left_frontidlermount_opt_1770864756.stepSTEP · 173.8 KB
- front_extruderhousing_1770864756.stepSTEP · 663 KB
- left_bedmount_opt_1770864757.stepSTEP · 711.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #218130
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
The goal of this project is to provide FDM-friendly replacement part CAD that is as close to stock parts as possible. This will allow CC owners to print replacement parts easily, and also serve as a base for future modifications
See also the full OpenCentauri CAD model of the printer available on Github and printables
Background:
Elegoo Provided us accurate CAD of many structural components of the Centauri carbon, most of these are also identical on the Centauri Carbon 2. However these designs are optimized for injection molding rather than FDM printing so I and other OC community members have begun working on optimizing these designs for FDM printing. by filling in ribs, modifying overhangs, and changing hole dimensions from those for injection molding inserts to voron style m3x4x5 heatsets, etc.
Current Status
Built in support has not been added yet but is planned at some point and further improvements may need to be done on some of these models- these are not tested designs and if you run into problems or want to contribute changes reach out on the opencentauri discord or make a pull request on the OC CAD github. Not all parts are included, currently we have optimized the following parts:
-
carriage parts
-
Extruder parts
-
Front idler mounts
-
Motor mounts
-
2/3 bed mounts
-
Z belt tensioner
We have CAD but have not yet optimized
-
The top rod mounts
-
the front right bed mount (though SE3D published a model)
Additionally not all models are particularly well suited for direct FDM optimization and better scratch designs from the community are available. In particular this applies to:
-
XY Bearing blocks: clogged_nozzl3's bearing blocks are strongly reccomended over the rough optimized version included here
-
Toolhead cowling/shell: There are numerous toolhead cowling options that are more suitable for FDM printing including the following:
-
clogged_nozzl3's ACCTC cowling heavily modified low mass gamma-variant
-
layer.shifted's cowling which offers a close to stock styling
-
My gamma cowling which offers a high strenght low mass magnetic version
-
Synthetic Electron 3D's cowling the first printable design with numerous remixes
-
Print spec
- Formats
- step
- Model files
- 13
- Total size
- 16.1 MB
- Largest file
- 3.5 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-
New -

-

-

-



