Skip to main content
F3D
Đầu máy Southern Pacific EMD SD9 G Scale tỉ lệ 1:29 1

7 images

Large file collection DIY

Đầu máy Southern Pacific EMD SD9 G Scale tỉ lệ 1:29

By Roger_2318451

Downloads
9
Likes
2
Views
117

Files 40 81.1 MB

  • Uncoupling_bar_holder_1770852878.stlSTL · 122.8 KB
  • Cab_front_back_window_frame_1770852879.stlSTL · 178 KB
  • Cab_Step_Screw_Cover_1770852879.stlSTL · 3.2 KB
  • Hand_Brake_1770852880.stlSTL · 66.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

THERE IS MORE TO COME - photos and instructions.

Here is a video of the prototype running: https://www.youtube.com/watch?v=gmJJkcrUjpw

This is a 1:29 Scale Southern Pacific EMD SD9 Locomotive. All body, base and truck parts are 3D printed. It uses two USA Trains R22-422 3-axle motor blocks. This design does NOT require any additional hardware or electronics from USA Trains.

I recommend printing at 0.10mm layer height, particularly for the side frames. It takes longer, but it well worth it.

The power trucks use a "center pivot," which is completely different than the way USA Trains mounts these trucks. (I use the exact same motor mounting method on my Krauss-Maffei design.) The "floppy axle" is left unconstrained (not attached in any way to the loco body.)

The axles ride in stainless steel roller bearings that are epoxied into the 3D printed side frames. The side frames are screwed to the 3D printed motor bracket. Metal foil is used to reduce wear on the surfaces that rub together under the frame. The trucks are attached to the base using M4 bolts and washers.

Read more Show less

Print spec

Formats
stl
Model files
40
Total size
81.1 MB
Largest file
13.4 MB

0 comments

See all