Kẹp Micro Không Dây - 35mm (Wireless Microphone Clip)

By Crafter64

Downloads: 2
Likes: 3
Views: 74
Remixes: 0
Comments: 0

Download all (.zip)· 8 files · 2.4 MB· 2.4 MB

Files 8 2.4 MB

Microphone_Shure_wireless_SLXD2holder_35MM_-_3D_PRINT_-_Base_2_1769824422.stlSTL · 69.6 KB
Microphone_Shure_wireless_SLXD2holder_35MM_-_3D_PRINT_-_Base_1_1769824423.stlSTL · 68.4 KB
Microphone_Shure_wireless_SLXD2holder_35MM_-_3D_PRINT_-_Base_3_1769824424.stlSTL · 69.4 KB
Microphone_Shure_wireless_SLXD2holder_35MM_-_3D_PRINT_-_Base_4_1769824424.stlSTL · 73.7 KB
Microphone_Shure_wireless_30MM_holder_1769824425.stpSTP · 146.9 KB
Microphone_Shure_wireless_SLXD2holder_35MM_-_3D_PRINT_-_TOP_1769824426.stlSTL · 1.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #207628
Category: Dụng Cụ Tiện Ích
Published: 01/31/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: microphoneholder

Description

Designed to hold a Shure PGXD2 wireless microphone (35mm). I've included the 30mm drawing too and the STP for the original.

Additional hardware required: The microphone stand threads are 5/8-27 UNS. You can buy an adapter to fit a 1/4-20 thread to mount to the bottom of these. The hole in the bottom is 0.350 to fit a 1/4-20 heat-set insert.
https://www.mcmaster.com/93365A162/

Hardware will be required for the pivot point. I've designed 4 different bases for the various options: Base 1 & 2 are for barrel bolts in both 1/4 and 5/16 sizes. Base 3 is for a 5/16 screw and a Nylock nut. Base 4 is for a 5/16 square head bolt with a wingnut.

PETG is probably the best option 0.4mm nozzle with 0.16mm layer height, 3-4 walls & 25-50% infill minimums.
PLA will creep over time and it best printed nearly solid.