Skip to main content
F3D
Weather Vane 2 (Cánh gió đứng) 1

9 images

Đồ Gia Dụng

Weather Vane 2 (Cánh gió đứng)

By Rypydus_1950556

Downloads
136
Likes
55
Views
1,016
Remixes
1

Files 17 34.9 MB

  • WeatherVane_part1_1769823834.stlSTL · 3.1 MB
  • WeatherVane_part2_1769823835.stlSTL · 86.4 KB
  • WeatherVane_part3_1769823835.stlSTL · 1.1 MB
  • WeatherVane_part4_1769823837.stlSTL · 4.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Weather vane 2.

Printed form PETG. Need 2x screw M8x100, 3x lock nut M8 and 4x bearings 608ZZ (ABEC for in line - bought in sport shop).

All parts printed full infil (better for point of gravity) with 3 perimeters and 0,2 mm layers.
Part 1 oriented screw side up, support on build plate only.
Part 2 oriented verticaly, no support.
Part 3 oriented screw side up, support on build plate only.
Part 4 no support, 9x.
Part 5 and 6 oriented screw side dovn, verticaly, support on build plate only.
Part 7 and 8 no support.
Part 9 oriented screw side dovn, verticaly, full support.
Part 10 no support.
Part 11 and 12 oriented verticaly, no support.
Part 13 oriented screw side up, support on build plate only.
Part 14 oriented verticaly, no support.

Part 11 is for mounting on pipe 39 mm, part 11B is for mounting on pipe 48 mm, part 11C is for mounting on wall.

Part 14B is shorter spike, but longer one is better for point of gravity.

Is better to use lubricant on screw and bearings.

All parts are screwed together and are fully replaceable. No glue.

Have fun.

Read more Show less

Print spec

Formats
stl
Model files
17
Total size
34.9 MB
Largest file
5.1 MB

0 comments

See all