Skip to main content
F3D
Còi túi mỏng phẳng (Flat Pocket Whistles) - WAISN 1

3 images

Dụng Cụ Tiện Ích

Còi túi mỏng phẳng (Flat Pocket Whistles) - WAISN

Remix of Còi Dẹt Túi Siêu To By PhoneDesigner

By sqky_4173712

Downloads
7
Likes
4
Views
135

Files 4 1.3 MB

  • WhistleFlatMini3mm_WAISN_V1_1769819347.3mf3MF · 172.4 KB
  • WhistleFlatMini3mm_WAISN_V2_1769819348.3mf3MF · 166.4 KB
  • WhistleFlatMini3mm_WAISN_V2_1769819349.stlSTL · 672.2 KB
  • WhistleFlat5mm_WAISN_V1_1769819350.3mf3MF · 335.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#207043
Published

Description

UPDATE 1/28 - V2:

After much arguing with my slicer and test printing, an improved version of the 3mm is now available. I'll be working on making similar updates to the 5mm very shortly. Original versions will be moved into a folder, with updates labeled with _V2.

Font Fix:  V2 prints more uniformly and consistently, with better individual character definition and less stringing. 
Prior version used a font with inconsistent line width, which was especially notable in the 3 and 4 in the phone number. V2 uses Calibri Light with a high level of boldness and increased character spacing (200pt/20pt for the phone number, 210pt/100pt for the website). Overall, these font changes allow for a larger font in the same amount of space, while guaranteeing each line can print in full when using a .4mm nozzle.

First Layer Filament Sequence:  V2 prints the website with reliable character definition, without fighting the slicer over text depth on the bottom layer.
Prior version used auto sequence, which initially turned out well (original V1 photo) but was increasingly printing with extremely poor legibility as the file defaulted to printing the bottom of the whistle before the website text. If you've run into this issue from V1 you can fix it with a very fine permanent marker, but it's not ideal. V2 sets the object plate settings for First Layer Filament Sequence to 'Customize' to force the text filament to print first; double check your settings to ensure that, whatever filaments you are using, you are forcing the text to print first. NOTE: I highly recommend a bit of glue to help the letters stick. If your plate is more static than stick, the letters may wander off.

Versions: 3mf and stl both available.

ORIGINAL INFO:

The 5mm whistle includes both the phone number, website, and whistling instructions.

The 3mm whistle has the phone number and website only.

Both files keep the WAISN info and instructions as separate objects for easy remixing.

I don't recommend ironing as it will muddy the text, as shown in the black 3mm photo.

Read more Show less

Print spec

Formats
3mfstl
Model files
4
Total size
1.3 MB
Largest file
672.2 KB

0 comments

See all