
PB Design - Sovol Zero - "ZeroTwins - TheRight" // HEPA Carbon Exhaust
- Downloads
- 3
- Likes
- 1
- Views
- 98
- Remixes
- 1
- Comments
- 0
Files 2 940.2 KB
- PB_Design_-_Sovol_Zero_-_ZeroTwins_-_TheRight_-_Housing_Exhaust_vfin_1769037501.stlSTL · 271.6 KB
- PB_Design_-_Sovol_Zero_-_ZeroTwins_-_TheRight_-_HEPA_Carbon_Box_Exhaust_vfin_1769037501.stlSTL · 668.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #201878
- Category
- Máy In 3D
- Published
Description
"ZeroTwins" is my 2nd attempt on the topic of filtration for Sovol Zero. This project is splitted into two parts.
"ZeroTwins TheLeft" --> for chamber filtration.
"ZeroTwins TheRight" --> for exhaust filtration.
See also:
I already designed a functional filtration update for the Zero...
...but still wanted to optimize it in a few ways:
-
HEPA, Carbon and Fan in the best possible order according airflow.
-
Exhaust HEPA Filter inside the chamber.
-
Making the carbon pellets for the exhaust replaceable.
-
Keeping the BentoBox style HEPA filters, despite the very limited space within the chamber.
-
A symmetrical and overall elegant and appealing design.
-
Still sufficient HEPA Carbon air filtration.
All parts - except the main body for the chamber filter - can be printed on the Zero.
For the HEPA carbon box use height range modifier in slicer. 0-2,65mm - I used 25% honeycomb.
Dissasembling the original exhaust filter is straight forward. Remove the two plates, remove the carbon box, unscrew the 4 screws outside the side panel, push out the fan (it is not secured with screws).
All parts should be easily to install. Take a look at the photo gallery for instructions. The pictures should be self-explanatory.
Add Carbon, press in HEPA filter, slide in box, done! Everything fits perfectly in place.
Use any sort of higher temp material. I used ABS+ for the housing and ASA for the box.
BOM:
-
4x M3x6 for Sidepanel Mount
-
2x M3x30-35 for Fan Mount
-
2x 6x3 Magnets
-
6x M3 Voron Style Heat Inserts
-
1x HEPA Filter (Bento-Box Style = "iLife V5 robot vacuum cleaner" Filter)
-
Carbon Pellets
Important: To install the HEPA Carbon box, you have to relocate the chamber temperature sensor! Otherwise you cannot place the box inside the housing! Relocating the sensor makes sense anyway.
My attempt to get this done:
Parts I used:
- HEPA Filter:
If you like my design, feel free to like, comment or add a make :)
Happy printing!
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 940.2 KB
- Largest file
- 668.6 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-
New -

-

-

-

-

-

-



