Phụ kiện WS2812B LED Panel: stand, soldering jig, v.v.

I made a few things as modular as possible here.  You can bridge the panels together, any number you want.  You can use the feet as feet to mount it on a flat surface, or, you can even mount this on the wall and use the "feet" as something like key hooks to hand your keys!  

all hardware is M3, you may want a 3mm drill to enlarge the holes if you want the hardware to pass all the way through and for you to use a nut instead.

The dimensions on all of these can be a little give or take, so you can print out the distance gauge and make sure your holes are 25mm spacing for the edge with the 3 holes in a row, and it should be 49mm center to center for the edge with 2 holes.  Make sure you print this to test, or measure your spacing and dimensions before printing, as there can be quite some variance to the dimensions depending on manufacturer & seller!

If you would like raw cad files for editing, please see: WS2812B LED panel 8x8 64 pixels frame, stand, mount, modular design, etc. | 3D CAD Model Library | GrabCAD