
ELU TGS 171 – Núm vặn (Turn-knob) M6 (942234-00)
- Downloads
- 0
- Likes
- 0
- Views
- 5
- Remixes
- 0
- Comments
- 0
Files 2 319.1 KB
- Turn-knob, M6 - Top, Half .3mf3MF · 158.8 KB
- Turn-knob, M6 - Bottom, Half.3mf3MF · 160.3 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #197698
- Category
- DIY
- Published
Description
Did you lose or break one of the turn knobs on your ELU saw? Well i have a solution for you!
Hardware needed:
-
1x M6 nut
- Preferably "high" variant, though stacking normal nuts is also possible
-
2x M3 screws (Designed for socket head, but pan/hex head also works)
- Length can be between 8mm -> 16mm*
*For socket head to be "inside" knob body max length is 12mm
How to assemble:
-
Insert M6 nut/nuts
-
Close the 2 halfs
-
Screw the 2 M3 screws directly into the bottom half (It's designed for them to cut their own threads)
Recommend Print Settings:
-
Material: PLA, PETG or ABS
-
Layer height: 0.1mm to 0.15mm
-
Perimeters/Walls: 5
-
Supports: OFF! (Model is designed to print without supports!)
-
Brim: 4mm (Only needed if not using glue on print bed)
-
Infill: 15% to 30%
-
Print orientation: See pic below
Not correct thread or some other idea for improving the model?
Don't hesitate to get in contact, and we will make one with that angle!
Looking for other 3D-Printable stuff for your ELU tablesaw, then checkout this collection:
https://www.printables.com/@markaabo_566920/collections/3024699
Print spec
- Formats
- 3mf
- Model files
- 2
- Total size
- 319.1 KB
- Largest file
- 160.3 KB
0 comments
You may also like 12 models
See all-

-

-

-

-
New -

-
New -

-

-

-

-


