Ender 3 Pro - Nozzle Wipe Attachment bản remix (Robert R/Legend)

Original remix: 

Original of the original remix:

Remixing allowed, however if you plan to remix the original file, please download from the above creators so they get the traffic.

I personally prefer silicon wipers as they do not ding my silicon socks/insulators as much as the brass ones. Over time as i print quite hot i go trough some socks as they ding the surface.

Made so that silicon can be poured in while clamping the mold top to the base. When cured You have an all in one part. 

V1 Is an entire different design for the mold, comes with 2 mold parts (1 spacer 1 main negative)

V2 requires 1 M3 heat set insert, a M3 screw to clamp down the brush. Has 3 molds to choose from 4-6mm as i sometimes print with and without glass bed. You could do with the longer one, but you have a chance that the stepper will skip steps when the nozzle hits the brush as there is more resistance.
It also has 1 universal insert with slanted holes for the silicon to anchor itself. NOTE that the bases are not interchangeable in this design with the V1. It also comes with the base with and without text. Note 2: When inserting the insert into the 4-6mm mold, ensure that the two prongs point down (towards the mold) it keeps it spaced so there ample silicon to bind.

About 34Grams of filament is used at 10% infill which suffices for me, anything over 25% is overkill.
Supports not required.
Print in shown orientation in images.

The mold is reusable, as the wiper can wear down over time (takes quite a long time my old designs lasted me over a year). I would ONLY recommend 2 part silicone rubber as shown in the picture below. They sell them with different harnesses/rigidity specifications 33 shore is for me about the sweet spot. They are also heat resistant up to 350C. The mold takes about 5ml of the mixture so with this kit will last you a while. I do recommend you designing or downloading some molds for your hot end socks. They are so much better then the stock ones. 

Source: Amazon