Multitool gắn MagSafe kèm ngàm PopSocket

Print Settings:

• layer height: 0.05mm

• nozzle: 0.4mm or 0.2mm

• material: PLA

• supports: snug, rectilinear

• brim: optional(depends on printer), I used mouse ears with 12mm width

Extra materials: 

• Magnets: Here are the magnets I used;https://www.amazon.ca/dp/B08Q7XWB85?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

• multitool: I used the tools from this Swisscard Lite knockoff(if you have the actual thing it should work too idk tho); https://www.amazon.ca/dp/B0FBGBWHK8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Printing instructions:

• Supports: You will need to paint on supports(can be seen in the images above, highlighted in blue),

• NOTE: Make sure supports run parallel to the walls of the slots so they're easier to remove(trust me, they're impossible to remove if you don't do this)

• Magnets: You will need to add a print pause at about 0.75mm. If you have other magnets that are a similar size, I've added a step file so you can edit the size of the magnet cavity.

• NOTE: Make sure the poles are in the correct direction, or else it won't stick to your phone.

• Popsocket Mount: Print this separately at 0.05mm layer height(print multiple as they will break)

Feel free to comment if you have questions. Otherwise Enjoy!