Watch Winder (Bộ xoay đồng hồ)

Differentiating parts; 

• 16x Magnets 6x2, two stacked op top of each other. (thesame size as used with gridfinity)

• I used some different brass inserts I had lying around; M3xD5.0xL4.0 used in the watch mount, M3xD4.6xL5.7 used in the dowels and some terrible cheap M3 ones for the electronics tray.

• I used a variety of fasteners; inbus M3x10, M3*12, M3*16 and the screws to mount the magnet mount Dm2.5x7

• The steel rod I used is D4.0*90

• Note; I printed all parts in PLA

TIP; print "Adjustment_Plate" and "Watch_Insert_Front" in a lower layer height, e.g. 0,1.

Links;

• For the electronics parts and software, please refer to https://github.com/mwood77/winderoo

• Winderoo wiring guide; https://github.com/mwood77/winderoo/blob/main/docs/wiring-diagram.md

• OSWW build guide; https://github.com/mwood77/osww/blob/main/instructions/build-guide.md

• For the assembly of the watch mount, please refer to https://www.youtube.com/watch?v=44cPCSx3O1Y&t=110s