
Vỏ phích cắm XT60
- Downloads
- 0
- Likes
- 0
- Views
- 0
- Remixes
- 2
- Comments
- 0
Files 4 1.7 MB
- XT60_Housing_F_1767522444.stlSTL · 718.5 KB
- XT60_F_1767522445.f3dF3D · 230.5 KB
- XT60_M_1767522446.f3dF3D · 243.5 KB
- XT60_Housing_M_1767522447.stlSTL · 597.3 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Vỏ chụp đầu XT60 cho cáp nguồn (XT60 Plug Housing for Power Supply Cable)ByNightHawk · 04/26/2026
Vỏ phích cắm XT30ByAcoustic Lemur Lemur · 03/15/2025
Details
- Model ID
- #19270
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
Description
A set of covers for a straight-through XT60 connection (mainly so I can avoid shrink tubing).
Has 2 separate 4mm diameter wire holes. The fit is a bit loose but suits my requirements.
I printed on a raft - without one, you may need to cut some of the inner edge to fit the connector. Note that not all connector brands may be the same.
No supports needed.
SAFETY: Please please keep in mind that you should solder your connectors really well. With these covers you won't be able to see if the wire might have come loose inside - so it is probably still safer to individually heat shrink the connections, especially if you are sending a lot of unfused current down them.
How I Designed This
Fusion360 - Drawings, Extrusions, Offset Planes, 1 Loft Extrude + 2 Loft Cuts, Edge Radius
Drawings, Extrusions, Offset Planes, 1 Loft Extrude + 2 Loft Cuts, Edge Radius
Category: R/C Vehicles
Print spec
- Formats
- f3dstl
- Model files
- 4
- Total size
- 1.7 MB
- Largest file
- 718.5 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-
New -

-

-


