
Elegoo Centauri Carbon – Nâng cấp XY-Gantry (Khắc phục GT2 Belt Ripple)
- Downloads
- 138
- Likes
- 88
- Views
- 1,852
- Remixes
- 1
- Comments
- 0
Files 2 768 KB
- Gantry_CC_1767587798.3mf3MF · 587.5 KB
- Centauri_Carbon_Gantry_1767587798.stepSTEP · 180.5 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #191385
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
Bei meinem Elegoo Centauri Carbon habe ich ein deutlich sichtbares 2-mm-Wellenmuster festgestellt, verursacht durch die glatten Umlenkrollen der XY-Gantry. Der GT2-Riemen rutscht dort über die Rollen, und das wiederholt sich als Ripple im Druckbild.
Da die Wellen fest in den Kunststoff eingepresst sind, war ein einfacher Tausch nicht möglich. Deshalb habe ich eine komplett neue XY-Gantry konstruiert und dort eine glatte und eine gezahnte Rolle eingesetzt. Ergebnis: weniger Vibrationen, keine 2-mm-Wellen mehr und ein ruhigeres Druckbild.
Die Teile habe ich bewusst in ASA gedruckt, damit sie auch bei höheren Temperaturen stabil bleiben.
Material:
8x M3 Gewindehülse 4,4mm Durchmesser
4x Welle 5mm Durchmesser 35mm Länge
20 Teeth Idler 2x mit Zähne 2x Glatt 5mm Innendurchmesser
On my Elegoo Centauri Carbon I noticed a visible 2 mm ripple pattern on the print surface. The cause turned out to be the smooth idlers on the XY-gantry: the GT2 belt slips slightly over them, and this periodic slip creates a repeating ripple in the print.
Since the shafts are pressed into the stock plastic parts, I couldn’t simply swap the pulleys. Instead, I designed a completely new XY-gantry, using one smooth and one toothed idler pulley. The result: reduced vibrations, no more 2 mm ripples, and smoother prints.
I printed the parts in ASA to ensure long-term stability under higher temperatures.
Materials:
8x M3 threaded insert, 4.4 mm diameter
4x shaft, 5 mm diameter, 35 mm length
20-tooth idler pulley, 2x toothed, 2x smooth, 5 mm inner diameter
Print spec
- Formats
- 3mfstep
- Model files
- 2
- Total size
- 768 KB
- Largest file
- 587.5 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-
New -
New


