Skip to main content
F3D
Vỏ Raspberry Pi 5" Touch Display 2 kèm chân đế cho Raspberr… 1

5 images

DIY

Vỏ Raspberry Pi 5" Touch Display 2 kèm chân đế cho Raspberry Pi 5

Remix of Hộp đựng màn hình cảm ứng Raspberry Pi 5 inch By MrPorcine_126339

By MrPorcine_126339

Downloads
2
Likes
1
Views
69

Files 17 3.5 MB

  • Top_1767379435.stepSTEP · 197.2 KB
  • lowerCut_1767379436.stepSTEP · 435.6 KB
  • cutDoor_1767379437.stepSTEP · 155.9 KB
  • Brace45_1767379438.stepSTEP · 63.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#188035
Category
DIY
Published

Description

This is a simple display case for a Raspberry Pi and the Raspberry Pi 5" touch display2. No supports are required to print. Most of the parts I printed with PETg. I use a Prusa MK3S with a 0.6mm nozzle. Parts were printed with a layer height of 0.3 or 0.4mm, depending on how much of a hurry I was in at the time.

The case will stand on a horizonal surface the the display tilted at 30 or 45 degrees, depending which of the two types of supports you use. Two supports are required, each of the same type.

Everything snaps together, although you can use four 3x6mm screws to be more secure. Don't use the longer screws called out in the previous version!

Step files are included if you want to modify the design.

Read more Show less

Print spec

Formats
fcstdstepstl
Model files
17
Total size
3.5 MB
Largest file
861.2 KB

0 comments

See all