
Hộp đựng màn hình cảm ứng Raspberry Pi 5 inch
- Downloads
- 8
- Likes
- 1
- Views
- 92
- Remixes
- 1
- Comments
- 0
Files 15 4.8 MB
- Pi5_5inDisp2_top_1766191464.stlSTL · 475.9 KB
- Pi5_5inDisp2_1766191464.fcstdFCSTD · 87 KB
- Pi5_5inDisp2-Top_1766191465.stepSTEP · 197.2 KB
- Pi5_5inDisp2_lower_1766191466.stlSTL · 966.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #168123
- Category
- DIY
- Published
- License
- GNU General Public License v3.0
Description
Print upper and lower halves, no supports necessary. I used ABS but I suspect that most filaments will work. There are two versions of the lower half, one with a door so you can (sort of) get to the SD card. Use a brim when you print the door. The two halves snap together and optionally use 4 M3x16 screws for a more secure assembly. The touch display 2 comes with the screws to fasten it to the top and also attach the Raspberry Pi. The model in the pictures was printed with a 0.6mm nozzle and a 0.4mm layer height.
Print spec
- Formats
- fcstdpdfstepstl
- Model files
- 15
- Total size
- 4.8 MB
- Largest file
- 966.1 KB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-
New -

-

-

-



