Bộ giảm thanh 40x100+

Warning: Do not use a printed tube to make a moderator.

A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers and the sprocket with the m3 mounting screws. There is an m12 thread in the back cover. For installation on pistols with internal thread, I recommend using an m12 threaded tube. 

The sides of the caps are 1 mm larger than the pipe diameter for mounting the heat shrink tube.

Added step files for adjusting the landing dimensions for different trunk diameters of the integrated moderator.