Skip to main content
F3D
Vỏ chống nước cho forumslader phiên bản 2 1

3 images

Thể Thao & Ngoài Trời

Vỏ chống nước cho forumslader phiên bản 2

By aquila_141816

Downloads
25
Likes
3
Views
732

Files 11 60.5 MB

  • forumslader_top_tube_mount_cap.gcodeGCODE · 9.9 MB
  • forumslader_top_tube_mount_with_brake_cable_body.gcodeGCODE · 32.6 MB
  • forumslader_top_tube_mount_cap.stlSTL · 336.7 KB
  • forumslader_top_tube_mount_with_brake_cable_body.stlSTL · 310.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a waterproof housing for the forumslader (ahead version), a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an app to connect with bluetooth to use as tachometer and to display charging power etc. Thanks to the guys from forumslader.de for such an awesome device!

The freecad files are attached. Feel free to adapt it to your needs.

Additionally required:

  • O-ring: Inner diameter: 22mm, section width: 2.5mm
  • Pressure compensating element (optional) see also here and here.
  • A bec plug (male), for the 12V output
  • 3x M3x20mm stainless steel bolts
  • 3x M3 stainless steel nuts
  • A 9x9 mm push button
  • Micro Jst 1,5 mm 4-pin female plug
  • Zipties 7mm max width
  • Dual USB-A plug, eg this.

Printing:

There are 4 versions of the body: with pressure compensating element and without, each with and without brake cable guide. The cap is the same for all versions.
There are holes for the temperature sensor, the LED, push button, 12V output, the 5V USB output and the dynamo input which have to be sealed with hot glue or epoxy after everything is in place. There is also a cutout for a bolt mount, which happens to be on my bike frame.

  • Use ASA-Filament for UV resistance.
  • 2mm Layer height, 4 perimeters, 40% infill
  • print vertically with bolt mounts at the top
  • no supports needed

Read more Show less

Print spec

Formats
fcstdgcodestl
Model files
11
Total size
60.5 MB
Largest file
32.6 MB

0 comments

See all