Bộ chuyển đổi PBR Bow bắn Silly Shells

Video: WIP

This is an adapter for the PBR Bow that allows it to fire Silly Shells! 

(Please go to the respective Printables pages to get the rest of the PBR Bow files, and the files for Silly Shells.)

Hardware needed:

• 1x -016 o-ring
• 1x M3 x 20mm Socket Cap Screw
• 1x Small spring (A pen spring works, but I use the small springs from the Orion Lynx. McMaster #9657K644)

Print settings:

• Print the Ejector levers at 100% infill, 8 walls. Use a brim if you have warping issues.
• Print the Shell Carriage at 20% infill, 5 walls.
• THE "ShellCarriage" NEEDS SUPPORTS!! Specifically around the shell rim engagement edge.

Misc.

If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!

China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.

Disclaimer: This is not a toy. This blaster is meant for hobbyists, not children. Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on this blaster. Consult local laws before building this high powered blaster.

Changelog:

• 7-12-2024: Release

Donations & Merch

If you like what I do, please consider supporting me! 

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

• Patreon (Monthly donations)
• Buy Me A Coffee (One-time donations)
• AWESOME shirts made in collab with Brandon Diaz
• RedBubble My merch shop, full of fun Nerf-y stickers and shirts!