PB Pistol/Masterkey – Blaster silly shell từ Xshot Longshot PT

The xshot longshot has a huge pt that you usually replace. The PBR bow is very cheap on hardware, although inconsistent with the PBR action. Added a catch and the option of a picatinny mount or pistol grip to make it a compact but powerful silly shell blaster.

Hardware:

• Xshot longshot PT + pair of orings (aftermarket metal ones work if you don't have one lying around)

• 016 o ring for the shell carriage.

• 12 m3x8 for the front plates

• 6 m3x10 screws for the catch block

• m3x35 screw for the plunger head

• 2 m3 nuts

• catch spring under 5mm id, over 4mm id, at least 10mm long

• at least 140mm of k25 (max ~15 coils if you don't shift the catch notch backwards)

Pistol Specific Hardware:

• m3x20 pin (you can also just print one or use a screw)

• 8 m3x8 screws for the grip

• (optional) m3x16 or longer screw for the ejector

• (optional) small spring for the ejector (same as whatever the wildstyle takes, but can accommodate a variety)

Masterkey Specific Hardware:

• 3 m3x30 screws

• 3 m3 nuts

Other things to consider:

• Use the stock bow arm grip from the PBR bow if this one is too short

• widen the catch button on the masterkey as you'd like to make it easier for you to hit as long as you don't change the print orientation

• pairs of m3x8 screws could be replaced with one screw slightly longer than their combined length + a nut