Trụ neo đất

Ground screw anchor 

with replaceable insert

The ground screw is the basis for my garden socket holder (in progress)
.. but can also be used for many other things

Installation in the ground

The ground screw is designed for medium-heavy soils. If necessary, a model is available to reinforce the screw (booster.stl)

Please use a 1/2 inch socket extension to screw it into the ground.

Inserts:

thread, for screwing in and twist-proof during normal use.
 

Flower

Locking screw

If it remains in the ground permanently, to securely close the screw.

and for easier finding

prevent twisting

Assembly: Put on the twist lock and press in with a screwdriver.
Disassembly: Carefully pull off with pliers.

Insert with hole ø6.5
e.g. for eyebolt M6x40
 

AND …

- Base for garden socket (in progress)

- Insert templates
   to easily create your own inserts.

Print settings

Print alignment as specified in the print file, no further alignment necessary.

Use reinforcement core (Cura)

• Disable merge overlapping volumes
• Load both models (ground_anchor.stl + booster.stl)
  Merge models
• Slicing

ground_anchor.stl

Support structure required, only the lower 11.5mm,

• Angle for support structure: 51°
• Material: PETG
• Wall lines: 5+
• Filling: >50%,
  with reinforcement core also less

Rest:

no support structure is required.

• Material: PETG
• Wall lines: 3+
• Filling: >15%, depending on load