Skip to main content
F3D
Giá Đỡ Cuộn Dây K1 Creality Bi 608 1

19 images

Máy In 3D

Giá Đỡ Cuộn Dây K1 Creality Bi 608

By coffeeguru_257293

Downloads
141
Likes
20
Views
746

Files 4 2.5 MB

  • K1_Bearing_Roller_-_COMPLETE_SET_v2_1767000466.stlSTL · 1.3 MB
  • K1_Bearing_Roller_-_CHAMBER_v2_1767000468.stlSTL · 532.4 KB
  • K1_Bearing_Roller_-_TWIST_v2_1767000469.stlSTL · 299.8 KB
  • K1_Bearing_Roller_-_ROLLER_v2_1767000470.stlSTL · 471.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A Filament spool holder that uses two 608 (8 x 22 x 7mm) bearings. Uses only about 36 gm of filament!

  • 3 degree up angle compensation for weight dip of a full spool. 
  • Designed to use very little supports.
  • Twist to lock adapter that accepts a friction fit post which allows the roller to position itself correctly no matter which K1 spool holder you have (Many maker made side spool creations out there have arbitaray tab points orientation).

Print Files:

  1. K1 Bearing Roller - TWIST.stl (Use SUPPORTS)
  2. K1 Bearing Roller - ROLLER.stl (No Supports, but BRIM recommended for the square object)
  3. K1 Bearing Roller - CHAMBER.stl (Use SUPPORTS for the peg)

The ROLLER is designed split in half and uses an alignment square. Mating surface is ridgeless because of chamfers which allows a smooth roll.

The CHAMBER has various exit holes to help exit debris so roller will keep rolling.
Bearings snap in a very satisfying way into place.
There are also ports under where the bearing seats so if you need to remove, insert a pointed object to drive the bearing out.

The CHAMBER should friction fit into the TWIST and still be able to rotate with medium force. Use XY hole compensation on your slicer if needed.

BOM:

Buy a Coffee for RaynovateLA

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
2.5 MB
Largest file
1.3 MB

0 comments

See all