Skip to main content
F3D
Hộp đựng kiêm cuộn dây sạc Apple Watch 1

9 images

Dụng Cụ Tiện Ích

Hộp đựng kiêm cuộn dây sạc Apple Watch

By TinkrMakr

Downloads
1,097
Likes
277
Views
5,756
Remixes
1

Files 10 31.2 MB

  • AppleWatch-Charger-Case_-_6.5mm_1766695975.3mf3MF · 176.3 KB
  • AppleWatch-Charger-Case_-_6.5mm-three-stripes_1766695976.3mf3MF · 176.7 KB
  • AppleWatch-Charger-Case_-_8mm_1766695977.3mf3MF · 176.4 KB
  • AppleWatch-Charger-Case_-_8mm-2c_1766695978.3mf3MF · 176.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Apple Watch Charger Case With Cord Winder.

This is a Print in Place cord winding case for Apple Watch chargers. Two separate models to work with variations in Apple Watch Chargers.

I have also added the gcode and 3mf files for the color changes prints pictured.

Note Multiple Models:

Two Models available depending on the Apple Watch charger you have, 

White Plastic casing 8mm

Metal Casing 6.5mm

Assemble: 

Align inside and outside holes and thread the USB end of the cable through. Align the cable end of the charger in the center of the holes going through the side and push that end down first. Then firmly push the opposite side of the charger from the cable down to snap into place. 

Charger Removal: 

To remove the charger push up from the bottom on the side opposite of the cable and reverse the steps to insert.

Printing:

When printing a good first layer calibration is important. If you have to much squish the inside and outside parts will be fused together. 

Print Settings:

Printed in PETG 

0.2mm

40% infill

Read more Show less

Print spec

Formats
3mfgcodestl
Model files
10
Total size
31.2 MB
Largest file
7.3 MB

0 comments

See all