Adapter Nạp Lại Sunlu

An adapter for the old Sunlu spools so that you can use refills. I have used the Elegoo refill with it.

My understanding is that the Sunlu spools have different generations. The newest ones don't need adapters, but the previous ones that have numbers on the sides possibly all vary slightly. The spool numbers that I have are all in the 60s, so the 40s, 50s, 70s, etc.. might not work as well, I couldn't say.

Printed in PLA with 2 walls and 15% infill. I super glued the adapter to the spool side with the middle bridge. There is a guide line on the adapter that should be lined up with the unlock line on the spool sides. (Shown below) It's not imperative, just helpful. 

Hope this helps others!