Vỏ Quạt GMKTec NucBox G3 Plus (80mm & 60mm)

This case has been designed to replcae the lid of the GMKTec G3 Plus (Intel N150) to give active airflow to the NVME and RAM.

Numerous variations/combos available:

• 80mm and 60mm fans
• 25mm and 15mm fan heights
• Enclosed or flat for mounting a fan on top
• With or without integrated fan grill
• No fan hole (solid) for customisation or custom fan holes/grills

8015 Grill version pictured.

There's no easy access to a 12V supply (other than tapping the power cable) so I opted for a USB 5V→12V USB PWM controller so that a standard 4-pin fan could be used.  A direct 5V USB fan would also be a good option if you can source one.

There's a couple notches at the back to feed the cable out.  Paint a vertical seam line near one to avoid a seam forming on the front.

Uses the existing clips on the G3 to attach.  Only the fan needs screws to mount.

No supports!

I've also made a height extension stand to give the CPU fan intake better access to air: https://www.printables.com/model/1334262-gmktec-nucbox-g3-plus-height-extension-stand