Khung Rack Raspberry Pi - MODS

Remix of Giá đỡ máy chủ Raspberry Pi hoàn toàn mô-đun By dougmeek

By revgolem_3646810

Downloads: 2
Likes: 0
Views: 106
Remixes: 0
Comments: 0

Download all (.zip)· 2 files · 548.9 KB· 548.9 KB

Files 2 548.9 KB

Faceplate_-_1U_-_Fan_-_SSD1306_OLED_1766602933.stlSTL · 361.1 KB
Tray_-_RPi_3-4_-_M25_Screws_1766602933.stlSTL · 187.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #174614
Category: Dụng Cụ Tiện Ích
Published: 12/25/2025
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: case
enclosure
rack
raspberry
pi
server
rpi
blades
ssd1306

Show more tags Show fewer tags

Description

The original design was fantastic, but I found I needed to make a few changes to work with what I had.

The Faceplate was modified to accept an SSD1306 128x32 OLED. I've found there are a bit easier and cheaper to acquire. It's a good fit that should stay in place, though a dab of hot glue wouldn't hurt. I also extended the mounting holes for the fan screws just a bit to better accommodate the hardware I had without trying to push through the front.

The Pi 3-4 Tray was modified to allow using M2.6 screws to mount the Pi to the base. I found the stubs in the original to be fragile and prone to popping off.