Digitenna - Anten Endfed Nhỏ Gọn Cho Băng Tần HF

Easy to use compact and lightweight endfed antenna for HF bands.

• Deploys in seconds – ideal for POTA activations and preparedness scenarios. Requires use of mast, tree or another raised point anchor point.
• BNC male connector. Short run of coax is required for connecting the transceiver. Coax shield acts as counterpoise to the radiating element
• Tested up to 30W with high duty digital modes operations
• Comes with 10m of silicon insulated 22AWG (random colors) – tune it for 20m and harmonics (10m, 15m, and 40m) by shortening or partially unwinding
• S-carabiner to connect to the anchor point

Order kit or complete antenna here: https://digirig.net/product/digitenna/

Assembly video here: https://www.youtube.com/@digirig/videos

The parts normally do not require support structures.

BOM:

• 3D printed parts
• 24AWG magnetic wire
• female BNC connector
• 100pF 1KV ceramic capacitor
• FT-82-43 Ferrite Toroid Core
• 3x M2.5 flat had screws 14mm length
• 10M of ~22AWG insulated (silicone recommended) multi-thread wire for 20M band. For lower bands use 20M length of thinner wire so it fits on the spool.
• Small S-carabiner