Bộ chia Y Bowden cho Qidi Box (AMS) , PC4-M6

I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates  the need for frequent reconnections.

Please look for pc4-m6 “through” type, for reference https://www.aliexpress.com/item/1005006176616947.html?spm=a2g0o

This splitter will only work with OD 4mmx ID 3mm(or wider) Bowden tube.

Checked both: horizontally and vertically printed and looks there is no issues with catching filament. 

Vertical print  needs to be done with supports as per screenshot ( please place support blocker as shown on photo)

Update 28/09 im using vertically printed splitter since i posted this model, not a single catch on this splitter working together with Qidi Box

Make sure ptfe tubes are inserted as per diagram shown on one of the photos

Thread for PC4-M6 is almost perfect fit, shouldn't be problem with it.

Printed with 0.12 layers, first 0.2. 

0.4 nozzle

Please check my other accessories and remixes for Qidi

Thank you