Skip to main content
F3D
Giá đỡ dụng cụ & pin Slatwall cho Milwaukee M12 1

2 images

DIY

Giá đỡ dụng cụ & pin Slatwall cho Milwaukee M12

By Yangorang

Downloads
419
Likes
74
Views
4,474

Files 12 9 MB

  • M12_Holder_Angled_Forward_1766302852.stpSTP · 563.7 KB
  • M12_Holder_Straight_Forward_1766302853.stpSTP · 482.8 KB
  • M12_Holder_Straight_Left_1766302854.stpSTP · 588 KB
  • M12_Holder_Straight_Right_1766302855.stpSTP · 563.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A collection of mounts for mounting Milwaukee M12 tools onto Slatwall.  They may look thin and flimsy but you'd be surprised how strong these are even in basic PLA if you print these with a lot of perimeters.

I used a 0.2mm layer height and the more perimeters the stronger - PLA+ and PETG both seem to be strong enough.  You will need supports and also be sure to print the base parts on their sides for strength.  I suggest simple Cyanoacrylate or Weld-Bond for gluing the two piece parts together.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage.  Don't force it onto your wall if you feel too much resistance.  You can and will damage PVC Slatwall this way. 

I have only tested with storeWall as that is the only system I personally have, but in theory this should work for most 3" Slatwall if the dimensions are close enough.

I extracted the profile for the battery opening on the battery holder from the model created by IconicJ. It is licensed under the Creative Commons Attribution license and can be found at the following link: https://www.thingiverse.com/thing:2493518/files
The overall shape of the holder and mounting method is entirely different.
Tool holders are completely original content.

Get 25% off CA Filament by using the following link:  http://referrals.californiafilament.com/v4Ge58zv?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoxMjI4MjA3NDUwfQ%3D%3D

Read more Show less

Print spec

Formats
stlstp
Model files
12
Total size
9 MB
Largest file
2.1 MB

0 comments

See all