
Sự Kiện - Lễ Hội
Kính dự tiệc - 2026
- Downloads
- 663
- Likes
- 134
- Views
- 1,824
- Remixes
- 1
- Comments
- 0
Files 5 3.4 MB
- party_glasses_2026_2col_1766297769.3mf3MF · 367.9 KB
- front_frame_2026_1766297770.stlSTL · 709.7 KB
- glasses_temple_R_1766297770.stlSTL · 259.8 KB
- glasses_temple_L_1766297771.stlSTL · 259.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #171160
- Category
- Sự Kiện - Lễ Hội
- Published
Description
3D model of party glasses for celebrating the arrival of the new year 2026.
Printing:
Print takes about 1h12min on CORE One and I recommend to use color-change during print, e.g. first 7 layers with one color and rest with black color. But of course you can go without color-change as well.
- Use PLA to bend the front part well in hot water.
- Use brim for the temples.
- Custom supports are ready for the revolute joint of the temples and work well for 0,2mm layerheight.
Post processing:
Also see images here https://www.printables.com/model/342945-party-glasses-2023.
- Remove temple brims and clean the edges.
- Bend the front frame a bit using hot water (or heat gun) and coffee saucer. Hot tap water was sufficient in my case.
- Remove small support block from the temples (inside joint).
- Try to insert piece of filament into the holes. The holes may probably need to be enlarged.
- Slide the temples onto the frame and insert the filament.
- Trim the end of the filament.
- Enjoy the party ;)
Print spec
- Formats
- 3mfbgcodestl
- Model files
- 5
- Total size
- 3.4 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-
New -

-
New -

-
New -

-

-

-
New -

-

-



