Skip to main content
F3D
Đế đỡ QIDI Box cho AMS 2 Pro Saver / Snag Cutter 1

7 images

Máy In 3D

Đế đỡ QIDI Box cho AMS 2 Pro Saver / Snag Cutter

By RVfan_2128794

Downloads
163
Likes
46
Views
1,602
Remixes
1

Files 2 249.5 KB

  • QIDI_Box_AMS_Snap_Base_V2_1766198691.3mf3MF · 74.9 KB
  • QIDI_Box_AMS_Snap_Base_V2_1766198692.stlSTL · 174.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

🔄 Update – Version 2 (Improved Mounting Design)

This new V2 version of the base plate features a completely redesigned mounting system.

Unlike V1, the base plate is no longer clamped deeply into the gap between the housing wall and the filament inlet cover, which in some cases caused issues during filament retraction.

✅ What’s new in V2:

The base plate is now clamped over the rubber sealing lip of the box lid
It is then snapped in from the rear over the filament inlet cover

This version holds even better than V1
No pressure is applied to the filament inlet cover
No influence on filament retraction anymore

🛠 Installation of V2:

First, press the base plate with the U-profile onto the rubber sealing lip
Align it centrally to the filament inlet hole
Then snap it over the rear edge of the filament inlet cover with some firm pressure
After that, press the front all the way down onto the rubber lip
Finally, attach the Snap Cutter

The mounting is fully tool-free and very secure.

See also this video:

📦 Project Description

This model is my own custom-designed base plate that allows the excellent AMS 2 Pro Saver / Snag Cutter system from Hexavalent to be used inside the QIDI Box (QIDI’s equivalent to the Bambu Lab AMS).
The geometry of this base plate is created completely from scratch and fits exclusively into the QIDI Box.

To make the full system work, you still need the remaining components from the original design, including all functional instructions.
You can find the original model here:
https://makerworld.com/en/models/1286770-ams-2-pro-saver-snag-cutter-v1-0#profileId-1316062

The videos provided in Hexavalent’s original design explain the assembly and the full working mechanism extremely well.
👉 Please make sure to watch them carefully, especially if this is your first time installing the system.

Required Original Parts for one Box

From the original model by Hexavalent, you will need:

4 x Spool Positions 2 & 4 Slide and Arm Options, V1.0.1
(Spool Positions 1 & 3 not necessary for QIDI Box)
No base plate / holder, No push button
(For me, the parts from Plate 1 were sufficient.)

This parts only needed:

Additionally, you will need:

4 x original Bambu Lab Replacement Filament Cutters
(https://store.bambulab.com/products/replacement-filament-cutter)
4 x 75mm PETF tube 4mm OD (leftover from QIDI Box installation material)
4 x 5mm PETF tube 4mm OD (leftover from QIDI Box installation material)

Installation Notes

In the photos and videos included here, you can see:

  • how the base plate is mounted inside the QIDI Box,

  • how the arm snaps into place,

  • and how the mechanism moves with the filament path.

A very important detail during use:
To prevent accidental filament cutting while loading filament, always move the slider to the right to disable the cutting function.
After the filament is fully loaded, remember to move the slider back to the left to enable the cutting function again.

Credits

Original Designer: Hexavalent
His work is truly outstanding, and without his clever design, this adaptation would not exist.
👉 Please support him by rating and commenting on his original model when downloading the required components.

Printing Recommendations

Material: PETG, ASA, ABS, or any heat-resistant filament
(The QIDI Box heats up during filament drying, so PLA is not recommended.)

Supports: Required
Some areas of the base plate have overhangs and need support.

Included Files

STL file of the base plate

3MF file with ready-to-print profile settings for the QIDI Plus 4

Read more Show less

Print spec

Formats
3mfstl
Model files
2
Total size
249.5 KB
Largest file
174.6 KB

0 comments

See all