Skip to main content
F3D
Đế Bánh Xe / Bánh Di Chuyển Cho IKEA BROR 1

4 images

Đồ Gia Dụng

Đế Bánh Xe / Bánh Di Chuyển Cho IKEA BROR

By Arek

Downloads
135
Likes
29
Views
2,090
Remixes
1

Files 6 775.6 KB

  • ikea_bror_wheel_mount_v2_1766151696.stlSTL · 127.8 KB
  • ikea_bror_wheel_mount_v2_1766151697.stepSTEP · 120.9 KB
  • ikea_bror_wheel_mount_v2_1766151698.f3dF3D · 182.5 KB
  • ikea_bror_wheel_mount_1766151698.stlSTL · 68.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

Wanted to add wheels to my IKEA BROR system (65x55x190cm; model 294.717.59 in my case; uses BROR posts model 103.332.87), so made this mount. No modifications needed in BROR system itself.

Printed in MK3S+ from PETG, 0.3mm layer, 4 walls, 30% infill (you can use your own parameters).

Wheels have ~ 37x46.5mm base plate with 33.8mm and 23.8mm spacing between holes center points. ( https://archiwum.allegro.pl/oferta/komplet-kol-fi-40-mm-kolo-kolko-kola-nie-rysuja-i11331349181.html )

Wheels mounted using four M5x10mm hex bolts and self locking four M5 nuts for each wheel (bolt on top, nut on bottom - this orientation because top area needs to be flat for bror leg).

Fusion 360 and step source files attached.

Edit:

Stronger (v2) version added.  Printed (on X1C)  with PETG using “0.28mm Extra Draft” mode and 8 walls. M5x12mm/14mm.

Read more Show less

Print spec

Formats
f3dstepstl
Model files
6
Total size
775.6 KB
Largest file
182.5 KB

0 comments

See all