
Hộp Đa Năng Có Các Bộ Phận Chèn
- Downloads
- 14,487
- Likes
- 6,272
- Views
- 84,145
- Remixes
- 6
- Comments
- 0
Files 21 27.1 MB
- Base_1765472398.stlSTL · 1.2 MB
- Lid_1765472399.stlSTL · 1.1 MB
- AA_Insert_1765472401.stlSTL · 899.5 KB
- AAA_6_Battery_Insert_1765472402.stlSTL · 766.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 6
Hộp đựng pin GoPro (GoPro battery box)ByRepoholy · 11/05/2026
Bộ kit may vá du lịch – thêu, cross stitch, sửa khẩn cấp & đồ thủ côngBylarisheva · 07/03/2026
Bộ sưu tập hộp đựng Gift Card (Gift Card Holder Collection)ByJamesThePrinter · 03/05/2026
Hộp Đựng Bàn Chải Đánh Răng Du LịchByJamesThePrinter · 12/18/2025
Details
- Model ID
- #157635
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
- Tags
- organizer
- box
- case
- container
- functional
- nozzle
- useful
- batteryholder
- strong
- rugged
- sdcard
- practical
- divider
- sdcardholder
- functionalprint
- ruggedbox
- microsd
- batterycase
- aabattery
- aaa
- aa
- nozzleholder
- sd
- aaabattery
- ruggedcase
- microsdcardholder
- nozzlebox
- aabatteryholder
- e3dv6
- aaabatteryholder
- practicalprint
- heavyduty
- rigid
- sdcardorganizer
- 9v
- 9vbattery
- nozzles
- dividers
- sdcardcase
- aaabatterystorage
- microsdcard
- aaabatterybox
- multifunctional
- practicaldesign
- aaabatteries
- 9volt
- 9vbatteryholder
- aaabatterycase
- microsdholder
- multiuse
- microsdcardcase
- microsdorganizer
- multifunction
- practicalprints
- microsdcase
- 9vholder
- 9vbatterystorage
- convert
- practicalprinting
- aaabox
Description
A small, strong case with a collection of optional inserts for different uses.
Case
Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.
This can be a standalone case or you can add inserts for more functionality. As requested, I have included the following lids with text to label the contents of your case:
- Blank Lid (default and easiest to print)
- AA Lid
- AAA Lid
- 9V Lid
- Digital Media Lid
- Nozzle Lid
Print Settings
Base and Lid can be printed with 3 perimeters and 0% infill. Using these settings, most walls will be solid. The combined print time was just over 3 hours for me.
Optional Inserts
- Battery Holders
- AA Holder - fits up to 6 AA batteries
- AAA Holder - Version 1 fits up to 6 AAA batteries, Version 2 (currently untested) holds up to 8 batteries
- 9V Holder - fits up to 2 9V batteries
- Digital Storage Holders - Can be used together or separately
- MicroSD Card Holder - fits up to 12 MicroSD cards in the lower section
- SD Card Holder - fits up to 6 SD cards in the upper section
- Dividers
- Full Divider - Splits the entire case into 2 compartments
- Upper Divider - adds 2 compartments on top - Can be used with the Lower Divider
- Lower Divider - adds 2 compartments on bottom - Can be used with the Upper Divider
- Nozzle Holders - Can be used together or separately
- Upper Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
- Lower Nozzle Holder - fits 14 standard nozzles (MK8 or E3D V6)
Print Settings
No special print settings are needed for any of the inserts. I used 2 perimeters and 10% infill. Print times range from 35 minutes to 2 hours, depending on which insert(s) you choose to use.
More inserts from other users can be found here.
The following filaments were used in the pictures above:
Black Case
- polymaker PolyTerra Charcoal PLA
- Hatchbox Sparkle Gray PLA
Red Case
- polymaker PolyTerra Army Red PLA
- polymaker PolyTerra Lava Red PLA
Yellow Case
- PrintBed Yellow PLA
- polymaker PolyTerra Banana PLA
Teal Case
- polymaker PolyTerra Arctic Teal PLA
- PrintBed Baja Blue PLA
Purple Case
- Prusament Galaxy Purple PLA
- Fillamentum Lilac PLA
Orange Case
- CC3D Flame Orange PLA+
- Inland Orange PLA
Green Case
- PrintBed Green PLA
- polymaker PolyTerra Forest Green PLA
Blue Case
- GIANTARM Matte Navy Blue PLA
- polymaker PolyTerra Sapphire Blue PLA
Print spec
- Formats
- f3dgcodestl
- Model files
- 21
- Total size
- 27.1 MB
- Largest file
- 4.3 MB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-
New

