Bảng thông gió cửa sổ cho XTool F1

This window vent plate is made for the XTool F1.  using all 3 parts fits a ~30.3 inch or 77cm (770mm) window (you can print as many plates as you want to fit your window…)

Note:
-Print in UV resistant filament such as ASA or ABS.
- 5% infill, Honeycomb pattern, 4 walls all around…
-This model has no front “mesh” in the pipe because I prefer to buy a cheap $2 metal one from the hardware store/Amazon or the dollar store that you can simply glue in place … (makes it look a lot better too!) You can also glue a piece of mosquito mesh…
-I will make a new model with a plastic mesh if enough interest is shown…
-Use M5 x 25mm stainless steel screws and locknuts or use some 5 minute Epoxy / Weldbond / Gorilla Clear Glue / or Thermoplastic Rubber-Based Sealant to hold plates together…
- Use some Heavy-Duty Self Adhesive Rubber Weatherstrip Seal (I like “Duck” brand) around the edge.

* Like it? , please consider donating the small amount of $1 to help me with Production and Design. If you own your own business and are going to use this model in your professional office / workshop / SOHO please consider donating $2 … (via: Ko-Fi ) - Thank You!

******

UPDATE JUNE 2023:

Fixed “end plate” design…

******

P.s. - I see you have an XTool F1… you are a person of high culture! ….  
Do you need a Bracelet bending tool? - You are in luck! :
https://www.printables.com/model/486272-bracelet-bending-tool

OR

Do you need a dust cover for your XTool F1? … I got ya covered!:
https://www.printables.com/model/532872-xtool-f1-dust-cover

********
Looking for more XTool F1 related stuff?
Look at all my models! :)