Nắp giữ cuộn filament cho hộp Polymaker Polydryer

By ParasitKegel

Downloads: 554
Likes: 137
Views: 1,651
Remixes: 0
Comments: 28

Download all (.zip)· 6 files · 9.7 MB· 9.7 MB

Files 6 9.7 MB

plug_with_slot_0.2mm_PETG_MK3S_18m44s_1765478014.gcodeGCODE · 1.1 MB
plug_without_slot_1765477854.stepSTEP · 1.3 MB
plug_with_slot_1765477869.stepSTEP · 1.3 MB
plug_without_slot_1765477886.stlSTL · 2.6 MB
plug_with_slot_1765477917.stlSTL · 2.6 MB
plug_with_slot_1765477993.3mf3MF · 744.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #155483
Category: Máy In 3D
Published: 12/03/2025
License: Creative Commons — Attribution
Tags: filament
drybox
plug
polymaker
polydryer

Show more tags Show fewer tags

Description

Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid.

Compatible with 1.75mm filament.
The hole in the plug end is designed with a 2° cone angle to secure the filament end of the internal spool.

Inserting and removing the filament end is made easier by slightly rotating the plug.

The holding force is optimal for stiff filament with a high coefficient of friction, but if the dry box is not to be shaken violently, it is absolutely sufficient for soft TPU.

The slit in the conical bore is intended to place the seam. An alternative model is included but using it might result in a worse cone surface.

The spiral pattern creates the surface effect. See the Fine Structured Surface Test Models for more information on that.

The G-Code file was sliced with Orca-Slicer for the Prusa i3 MK3s and Fiberlogy - Matte PET-G - Black.

The included 3MF is an Orca-Slicer project file.

STEP files included.