Giá đỡ extruder ADXL345 cho Elegoo Neptune 4 Pro

An extruder mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount.

This mount was designed for the Neptune 4 Pro but may work on other models.

If this works on your printer using POM V-guide rails please let me know!

This leverages heat set inserts to ensure the ADXL345 stays secured and mounts to an available slot on the extruder itself

Bill of Materials:

• 2x - Heat Set Inserts (M3x5x4)
• 3x - M3 4mm cap head bolts for upper mounting the ADXL345 to the print and the print to the extruder

Print Settings:

• 4 Perimeters/walls
• 15% infill
• 0.2mm layer height
• 0.4mm line width
• 5 top and bottom layers
• Parts are pre oriented in the correct position for printing
• Supports required only for the brace, please refer to the image below