
Hộp Đựng Tua Vít LTT
- Downloads
- 1,646
- Likes
- 360
- Views
- 12,167
- Remixes
- 2
- Comments
- 0
Files 20 14.1 MB
- LTT_Screwdriver_Case_Bottom_8x2mm_magnet_version_1765672128.stlSTL · 984.5 KB
- LTT_Screwdriver_Case_Bottom_8x3mm_magnet_version_1765672129.stlSTL · 977.6 KB
- LTT_Screwdriver_Case_Bottom_non_magnet_version_1765672130.stlSTL · 945.8 KB
- LTT_Screwdriver_Case_Bottom_x48_Bit_8x2mm_magnet_version_1765672131.stlSTL · 1.1 MB
Make a variant with AI
Build another version of this model.
Remix versions 2
Gridfinity LTT Screwdriver – Khay 6x2 kèm 72 bitsByhockeygoalie35 · 04/25/2026Hộp tua vít LTT: Khe giữ nam châmByDerEd_731144 · 07/18/2025
Details
- Model ID
- #150860
- Category
- DIY
- Published
Description
Always liked the remixes of this box for other tools so thought I would have a go at creating my own for the LTT Screwdriver.
Everything prints without supports and the only slightly fiddly thing is putting the magnets in that version of the bit holder, I have attached some pictures to help. What I did was put a colour change into PrusaSlicer at layer 21 and put the magnets in when it stopped, does make it easier if you have a steel bed as it keeps the magnets in place before the printer seals them. I used 12 as I had loads of them left and they are pretty cheap but you might be able to get away with only using 8, mine came in a pack of 50 so better to use all 12 if you can.
I have uploaded a magnet version and non magnet version of the Bottom and Bit holder so you can choose.
Also I have added a template for inside the lid as I lined mine with some 1mm thick adhesive backed felt from Amazon, if you print the non magnet version some 1.5-2mm foam or felt would stop things rattling.
I printed it all with a .6 nozzle at .2mm layer height, any help with anything or problems please ask and I am sure I can sort it.
Thanks
You will require
8 m3x20mm machine screws and 30 8x3/8x2mm magnets if you are printing that version, 60 for the 48 bit or 90 for the 72 bit version.
Small update I have added a second style of latch.
2nd Update 21/1/2023 Added a version that holds all 72 bits, just fits on a standard 250mm print bed but is no wider than the 24 bit version.
Also big update and a massive oversight on my part the original has been modified so it fits on a standard 230mm print bed.
3rd Update 26/1/2023 Added a 8x2mm magnet version of the bottom of the case and Bit holder.
4th Update 01/02/2023 Thought I would complete the set by adding a 48 bit version, comes in the standard 24 bit size case in 8x2mm, 8x3mm and no magnet versions.
Final Update 23/03/2023 Final update for the case I have added some of the refinements I made in my slim case. Like adding the finger and thumb holes to make it easier getting the screwdriver out and adding a notch at the bottom to make space for the ribs at the bottom of the screwdriver so it sits in nice and snug.
Print spec
- Formats
- stl
- Model files
- 20
- Total size
- 14.1 MB
- Largest file
- 2.4 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-
New -
New -
New -

-

-

-


