Skip to main content
F3D
Vỏ Cube Aqara Chủ Đề Công Nghệ
Dụng Cụ Tiện Ích

Vỏ Cube Aqara Chủ Đề Công Nghệ

By zachsb_1789251

Downloads
51
Likes
11
Views
455

Files 6 1.1 MB

  • 1_1766488424.stlSTL · 184.1 KB
  • 2_1766488424.stlSTL · 187.2 KB
  • 3_1766488425.stlSTL · 192.3 KB
  • 4_1766488426.stlSTL · 195 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

The Aqara Cube (MFKZQ01LM) is a fun little smart home gadget. It allows you to control compatible (or not if using Home Assistant) smart devices with actions such as rotating and sliding, depending on which face is currently up. The problem is the cube is largely featureless, which makes keeping track of the faces hard. 

This design has different shapes in the center of each face to help distinguish them.

More importantly, it looks really cool.

Printing

Print face down. If doing a color change it is easier to do all at once.

Note: This was sliced in Cura using the “Exclusive” Slicing Tolerance setting. No allowance for tolerance was made in the model.

Filaments: 

Bed: Carbon Fiber patterned  PET sheet

Assembly Guide

Double sided sticky tape. 

Assembly Tips and tricks

  1. Choose one side face on the cube and have it sit facing up, then set up the tape on this face. Set the matching printer cover aside.
  2. Assemble the other sides around the cube without sticking them down, making sure to line up notches, it doesn't matter if the numbers match up yet. 
  3. Take the side that you set aside (that matches the uncovered cube face), and stick it onto the cube. The other faces will help align it correctly.
  4. Rinse, repeat. (Don't actually rinse).

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
1.1 MB
Largest file
200.5 KB

0 comments

See all