Skip to main content
F3D
Large file collection DIY

Giá đỡ Dremel 4000

By pejvl2000

Downloads
7,338
Likes
5,806
Views
66,807
Remixes
3

Files 23 125.6 MB

  • Base_0.2mm_PETG_MK3S_1d1h16m_1766258625.gcodeGCODE · 46.3 MB
  • Plate_0.2mm_PETG_MK3S_6h18m_1766258627.gcodeGCODE · 13.4 MB
  • Vertical_Guide_0.2mm_PETG_MK3S_9h6m_1766258630.gcodeGCODE · 21.9 MB
  • Vertical_guide_lock_knob_0.2mm_PETG_MK3S_48m_1766258633.gcodeGCODE · 2.6 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 3

See all 3 remixes

Description

This model is a REMIX of 3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260

It's modified to fit the Prusa MK3S+ printer and it has several improvements:

  • Smaller base, so it can fit to the printer bed
  • Divided plate on the base, so you can print it directly on the bed and it will have a nice flat surface
  • Divided Dremel 4000 holder, so it can fit to the printer
  • Cap for the pipe
  • Modified kable guide

Print settings

  • PETG
  • 0,2 mm
  • 15% infill
  • Supports are needed for most parts

BOM:

  • Aluminum (or steel) pipe - 22 x 2 mm (cut 2 pieces: 350 mm and 250 mm)
  • 625ZZ bearings - 5 x 16 x 5 mm (6x)
  • M5 Nuts (13x)
  • M5 Washers (11x)
  • Hex head screws:
    • M5 x 45 (1x)
    • M5 x 30 (6x)
  • Socket hex head screws:
    • M5 x 30 (3x)
    • M5 x 20 (4x)
    • M5 x 15 (1x)
  • Flat hex socket head screws:
    • M5 x 20 (4x)
    • M2 x 6 (1)

Assembly:

  • Mount plate to the base by 4 flat hex socket screws:
  • Mount 350 mm pipe to the base by M5 x 30 screws (3x), M5 nuts (3x) and washers (6x):
  • Assemble bearings and vertical guide by socket hex head screws M5 x 20 (4x), M5 x 30 (2x) and 6 nuts:
  • Mount 250 mm pipe to the Dremel holder by M5 x 30 screws (2x), M5 nuts (2x) and washers (4x):
  • Mount the top cap to the Dremel holder and 250 mm pipe by M5 x 30 socket hex head screw, then mount the cable guide by M2 screw:
  • Put a vertical guide to the pipe of the Dremel holder:
  • Assemble the vertical guide to the 350 mm pipe on the base by vertical guide lock knob, M5 x 45 screw, and nut. Then add a cap to the top of the pipe:
  • Glue together the lever and prepare the lock knob for the lever, M5 x 30 hex head screw, washer, and nut:
  • Assemble the lever (M5 x 15 screw):
  • Mount the DREMEL:

Read more Show less

Print spec

Formats
gcodestlzip
Model files
23
Total size
125.6 MB
Largest file
46.3 MB

0 comments

See all