Bộ Chỉnh Đầu Dò Kobra Neo

Adjusts the height/offset of the Inductive Probe used on AnyCubic Kobra Neo.

This will set your Y offset from 4 to 0.

In the larger holes a M2.5 Heatset Insert is used, original mounting hardware for the adapter plate to the OEM probe mount.

This will allow you to use longer hot ends/heat breaks without loosing the use of or loosening the probe to the point it wobbles. Can also be used with OEM hot end parts to keep the probe more securely sucked into the OEM mount.

If you are using a lower hot end such as I am, you will need a modified fan duct to direct the airflow down to the printed parts.

Category: 3D Printers