Vỏ BTT TFT35 E-3 V3 có WiFi cho Ender 5

I remixed the case by qwert29 due to a few issues with my board not fitting correctly as well as adjusting for minor cosmetic changes.

Front:

1. Add 1.5mm inside right so that it ensures that the displayed screen is perfectly aligned, no more non display showing.

2. Increased the size of the hole for the knob to allow for the LED light to passthrough, cosmetic.
   Back:

3. Adjusted WiFi hole increasing size and adding some chamfer to the hole to allow for variance in board of the TFT positioning of components. Previous I had to file it to be able to push board down.

4. Removed some corners and added some chamfer to holes.

5. Removed some of the text this is due to conversion and making mesh simpler.
   update 10/10/20

   Front

6. Added front without Ender 5 text for other printer users.
   Back

7. Added a back cover with the mounts on top so it can be screwed to top.
   update 23/11/202

   I've added a bottom enclosure with all EXP ports accessible, I've not printed it so please let me know your feedback.

   If you like my work you can support me via paypal.me/hmsq , thanks

Print instructions

Unassociated tags: BTT TFT35 E-3 V3.0, TFT35 E-3 V3, TFT35 E3 V3

Category: 3D Printer Accessories Summary

I remixed the case by qwert29 due to a few issues with my board not fitting correctly as well as adjusting for minor cosmetic changes.

Front:

1. Add 1.5mm inside right so that it ensures that the displayed screen is perfectly aligned, no more non display showing.

2. Increased the size of the hole for the knob to allow for the LED light to passthrough, cosmetic.
   Back:

3. Adjusted WiFi hole increasing size and adding some chamfer to the hole to allow for variance in board of the TFT positioning of components. Previous I had to file it to be able to push board down.

4. Removed some corners and added some chamfer to holes.

5. Removed some of the text this is due to conversion and making mesh simpler.
   update 10/10/20

   Front

6. Added front without Ender 5 text for other printer users.
   Back

7. Added a back cover with the mounts on top so it can be screwed to top.
   update 23/11/202

   I've added a bottom enclosure with all EXP ports accessible, I've not printed it so please let me know your feedback.

   If you like my work you can support me via paypal.me/hmsq , thanks

   Print Settings

Printer Brand:

Creality

Printer:

Ender 5

**Rafts:**

No

Supports:

Yes

**Resolution:**

0.2

Infill:

25%

**Filament:** eSUN PLA+ Fire Engine Red