Giá đỡ Raspberry Pi Camera Module 3 cho CR-10 V2

Based on: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/richardjm/picam-corner

I remodeled the design of DeVsFaN1830 in SolidWorks for my CR-10 V2. Since this printer doesn't have the same frame as the Voron 2.4, means it is now mounted on the base extrusions of the cr-10 v2 using 2 M3 T-nuts and some M3 screws. The fitment can be a bit finicky as the T-nuts tend to not rotate if they are too high. Note a long allen key with ball head is required for installation.

For cable management, I used https://www.printables.com/model/118550-cable-clip-for-2020-extrusion.