Skip to main content
F3D
Hệ Thống Bôi Trơn Cho Máy Chạy Bộ 1

2 images

Thể Thao & Ngoài Trời

Hệ Thống Bôi Trơn Cho Máy Chạy Bộ

By ClimbingSeb_1732611

Downloads
13
Likes
2
Views
361

Files 3 3.4 MB

  • half-funnel-for-8mm-hose_1766606780.stlSTL · 1.7 MB
  • plug-for-4.5mm-hole_1766606781.stlSTL · 253.2 KB
  • clamp-for-8mm-hose_1766606782.stlSTL · 1.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

My treadmill didn't come with any automatic lubrication system so I designed this system.

A rubber hose was cut with small holes along one side, clamped to each side of the treadmill band and a funnel was mounted on the side of the band, allowing me to pour lubricants in it and it will drip down on the band.

I used a 8mm rubber hose with 4.5mm inner diameter. 

It doesn't work so well if the treadmill is stored vertically, then the lubricant stored in the hose will all be emptied on the band. If one mounts the hose at the same height as the funnel, then there is a risk the lubricant will flow out of the funnel instead.

Everything was printed with 0.2mm layer height and 0.4mm nozzle. The funnel was printed in PLA with the big opening down. No support. The clamp was printed with 4 walls, 5 top and bottom layers.

The onshape document is here.

Read more Show less

Print spec

Formats
stl
Model files
3
Total size
3.4 MB
Largest file
1.7 MB

0 comments

See all