
Đế Tản Nhiệt Cho Ổ Cứng Dell P03YC
- Downloads
- 14
- Likes
- 2
- Views
- 187
- Remixes
- 0
- Comments
- 0
Files 1 163.5 KB
- Dell_0P03YC_Carrier_1767274868.stlSTL · 163.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #134046
- Category
- Dụng Cụ Tiện Ích
- Published
Description
Note:
This carrier was designed and tested only for Dell 0P03YC drives in a Dell MX750c server. Similar SSDs and similar servers may work with this model, but this must be tested by yourself.
The picture of the carriers in the server depicts an older version of the model, nevertheless the dimensions and features are the same.
Installation instructions:
One side of the carrier is marked with a triangle, align the holes of the SSD with the studs and insert it into the carrier.
Now the other side of the carrier can be bent around the SSD with some force. The tension should press the studs into the holes of the SSD and thus hold the SSD in place. The complete package can now be installed in the server.
Print advice:
Due to potentially high temperatures inside the server, the carrier should not be printed with PLA or other non heat-resistant materials.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 163.5 KB
- Largest file
- 163.5 KB
0 comments
You may also like 12 models
See all-
New -

-

-

-

-

-

-

-

-

-

-


