Hộp làm khô Filament V10.1

A Filament-Drybox with 2 variants of the upperpart (round and angular)

Use 3mm EPDM-Roundseal and glue it in the groove on the basepart and the upperpart.
https://www.amazon.de/gp/product/B077N3TV5P/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1

For the window i used 3mm thick glass, but acrylic-glass is also useable. Glue it airtight in the basepart.

For the hinge and the latch use 2 peaces M4 rod with M4 selflocking Nuts, M3/14 srews and M3 nuts.

Hole for M10 Bowdencuppler ist very thigt in the dimension, evetually you must bore ist a little bit up.

The rolls and the base ist designed for 6001-2RS 12 × 28 × 8 mm / 0,47 × 1,1 × 0,31 Zoll bearings.
https://www.amazon.de/gp/product/B07VBMZ82S/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

I added 2 stashes for sachet of silica gel in the base and a stash in the angular variant of the upper.

UPDATE V10.1: rounded edges of the sealgroove (pictures are the old ones) and added an magnetic PTFE-Tubecoupler ( remix from https://www.printables.com/de/model/145843-magnetic-pfte-coupler-end-for-dry-box )

3D PRINTING SETTINGS

Layerheight 0,3mm, 3 shells (with 0.4 nozzle), 8 - 10% Infill,

Use brim and additonal "brimtaps" on the corners to avoid warping.

Base and Upper with PLA 215/60 degrees centigrade, supports only at the window and at the latchnose.

Hinge, Rolls and Latch, PETG 225/70 degrees centigrade, with supports.